Hostname: page-component-7f64f4797f-tldsr Total loading time: 0.001 Render date: 2025-11-04T00:35:24.569Z Has data issue: false hasContentIssue false
  • English
  • Français

Gas emission of anode polymer coating and its influence on applied – B r magnetically insulated ion diode characteristics

Published online by Cambridge University Press:  20 December 2016

V.S. Lopatin ,
A.V. Stepanov ,
G.E. Remnev  and
V.I. Shamanin
V.S. Lopatin
Affiliation:
Tomsk Polytechnic University, Tomsk 634050, Russia
A.V. Stepanov*
Affiliation:
Tomsk Polytechnic University, Tomsk 634050, Russia
G.E. Remnev
Affiliation:
Tomsk Polytechnic University, Tomsk 634050, Russia
V.I. Shamanin
Affiliation:
Tomsk Polytechnic University, Tomsk 634050, Russia
*
Address correspondence and reprint requests to: A.V. Stepanov, Tomsk Polytechnic University, Tomsk 634050, Russia. E-mail: stepanovav@mail.ru
Get access Rights & Permissions [Opens in a new window]

Abstract

The paper presents the result of investigation gas emission from anode polymer coating of applied – B r magnetically insulated ion diode. The gas pressure value for any polymer type was determined. The investigations of the pressure variation were carried out during the pulse repetition rate of ion beam from 1 to 4 pps. The residual gas pressure value variation inside the vacuum chamber influenced on the ion beam parameters. The mass content of ion beam injected into the transition area did not depend on the residual gas pressure value. The breakdown of residual gas pressure by eddy electric field of magnetic coils was investigated.

Keywords

Ion beamPlasma sourceGas pressureIon beam characteristics

Information

Type
Research Article
Information
Laser and Particle Beams , Volume 35 , Issue 1 , March 2017 , pp. 48 - 52
Copyright
Copyright © Cambridge University Press 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

Furman, E.G., Remnev, G.E., Karpuzov, S.B., Kondratiev, N.A., Pushkarev, A.I. & Goncharov, D.V. (2004). A high-current pulsed accelerator with a matching transformer. Instrum. Exp. Tech. 47, 394.Google Scholar
Furman, E.G., Stepanov, A.V. & Furman, N.Zh. (2007). Ionic diode. Tech. Phys. 77, 86.Google Scholar
Greenly, J.B., Ueda, M., Rondeau, G.D. & Hammer, D.A. (1988). Magnetically insulated ion diode with a gas-breakdown plasma anode. J. Appl. Phys. 63, 1872.CrossRefGoogle Scholar
Jacobs, H., Freely, J. & Brand, F.A. (1952). The mechanism of field dependent secondary emission. Phys. Rev. 88, 492.Google Scholar
Johnson, D.J., Quintenz, J.P. & Sweeney, M.A. (1985). Electron and ion kinetics and anode plasma formation in two applied B r field ion diodes. J. Appl. Phys. 57, 794.Google Scholar
Lopatin, V.S., Remnev, G.E., Furman, E.G., Makeev, V.A. & Stepanov, A.V. (2004). An ion diode with external magnetic insulation. Instrum. Exp. Tech. 47, 484.Google Scholar
Lopatin, V.S., Remnev, G.E. & Stepanov, A.V. (2008). Study of magnetically isolated with dielectric anode at repetitive rate operation mode. Proc. Fifth Int. Conf. on High Power Particle Beams, p. 87. Xiʼan, CA: Jianjun Deng and Jinshui Shi.Google Scholar
Nakagawa, Y., Isaka, K., Kohchi, A. & Matsushita, K. (1994). Pulsed intense ion diode for surface modification. Rev. Sci. Instrum. 65, 1345.CrossRefGoogle Scholar
Remnev, G.E., Ivanov, Yu.F., Naiden, E.P., Stepanov, A.V., Saltymakov, M.S. & Shtanko, V.F. (2009). Formation of silicon carbide and diamond nanoparticles in the surface layer of a silicon target during short-pulse carbon ion implantation. Tech. Phys. 54, 600.CrossRefGoogle Scholar
Stepanov, A.V. & Remnev, G.E. (2009). Influence of the configuration of the magnetic field of an ion diode on the parameters of an ion beam. Instrum. Exp. Tech. 52, 565.CrossRefGoogle Scholar
Sweeney, M.A., Brandenburg, J.E., Gerber, R.A., Johnson, D.J., Hoffman, J.M., Miller, P.A., Quintenz, J.P., Slutz, S.A. & Bieg, K.W. (1984). Proc. Fifth Int. Conf. on High Power Particle Beams, p. 203. San Francisco, CA: R.J. Briggs and A.J. Toepfer.Google Scholar
Wood, B.P., Perry, A.J., Bitteker, L.J. &Waganaar, W.J. (1998). Synthesis and characterization of micropores on nanocrystalline pure copper surface by high-current pulsed electron beam irradiation. Surf. Coat. Technol. 171, 108.Google Scholar
Yatsui, K., Grigoriu, C., Kubo, H., Masugata, K. & Shimotori, Y. (1995). Synthesis of nanosize powders of alumina by ablation plasma produced by intense pulsed light-ion beam. Appl. Phys. Lett. 67, 1214.CrossRefGoogle Scholar
Yatsuzuka, M., Yamasaki, T., Uchida, H. & Hashimoto, Y. (1995). Amorphous layer formation on a Ni65Cr15P16B4 alloy by irradiation of an intense pulsed ion beam. Appl. Phys. Lett. 67, 206.Google Scholar
Zhu, X.P., Dong, Z.H., Han, X.G., Xin, J.P. & Lei, M.K. (2007). Lifetime of anode polymer in magnetically insulated ion diodes for high-intensity pulsed ion beam generation. Rev. Sci. Instrum. 78, 023301.Google Scholar