Hostname: page-component-7f64f4797f-tldsr Total loading time: 0.001 Render date: 2025-11-04T11:02:36.374Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of heavy tungsten alloys via powder reduction technique

Published online by Cambridge University Press:  19 September 2016

Heba Al-Kelesh ,
K.S. Abdel Halim  and
M.I. Nasr
Heba Al-Kelesh*
Affiliation:
Central Metallurgical Research and Development Institute (CMRDI), Helwan, Cairo 11421, Egypt
K.S. Abdel Halim
Affiliation:
Central Metallurgical Research and Development Institute (CMRDI), Helwan, Cairo 11421, Egypt; and Department of Chemical Engineering, College of Engineering, University of Hai'l, Hail, Saudi Arabia
M.I. Nasr
Affiliation:
Central Metallurgical Research and Development Institute (CMRDI), Helwan, Cairo 11421, Egypt
*
a) Address all correspondence to this author. e-mail: hebaalkelesh@hotmail.com, hebaalkelesh@gmail.com
Get access

Abstract

Heavy tungsten alloys with the following compositions 98W2Fe, 93W7Fe, and 95W2Fe3Ni were successfully prepared through gaseous reduction of metal oxide mixtures in the temperature range of 850–1000 °C. Reduced samples were subjected to sintering processes in reducing atmosphere (Ar/4% H2) at different temperatures (1200–1300 °C) and dwell times (30, 90 min). The prepared alloys together with the sintered samples were characterized by x-ray diffraction (XRD), field emission scanning electron microscope (FESEM), and optical microscope. The microhardness of the sintered samples was measured and correlated to sintering temperature and dwell time. The presence of iron oxide decreases the reducibility of WO3 whereas the presence of NiO increases the reducibility of both iron oxide and tungsten oxide. With the increase of sintering temperature and dwell time, porosity of samples decreases forming dense structure which is coupled with the increase of hardness particularly for 95W2Fe3Ni alloy.

Keywords

heavy tungsten alloysreductionsinteringmetal oxidekinetics and mechanismhardnessmicrostructure

Information

Type
Articles
Information
Journal of Materials Research , Volume 31 , Issue 19 , 14 October 2016 , pp. 2977 - 2986
Check for updates
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

He, J., He, F-L., Li, D-W., Liu, Y-L., and Yin, D-C.: A novel porous Fe/Fe–W alloy scaffold with a double—Layer structured skeleton preparation, in vitro degradability and biointerfaces. Colloids Surface B: Biointerfaces 142, 325 (2016).Google Scholar
Yunzhu, M., Jiajia, Z., Wensheng, L., and Yaxu, Z.: Transient liquid-phase sintering characteristic of W–Ni–Fe alloy via microwave-assisted heating. Rare Met. Mater. Eng. 43(9), 2108 (2014).CrossRefGoogle Scholar
Patra, A., Meraj, Md., Pal, S., Yedla, N., and Karak, S.K.: Experimental and atomistic simulation based study of W based alloys synthesized by mechanical alloying. Int. J. Refract. Met. Hard Mater. 58, 57 (2016).Google Scholar
Xia, M., Huang, P., Cu, R-K., and Ge, C-c.: Cold sprayed W/Ni/Fe alloy coating: Microstructure and mechanical properties. Surf. Coat. Technol. 291, 376 (2016).CrossRefGoogle Scholar
Oliveira, A.L.M., Costa, J.D., De Sousa, M.B., Alves, J.J.N., Campos, A.R.N., Santana, R.A.C., and Parasad, S.: Studies on electrodeposition and characterization of the Ni–W–Fe alloys coatings. J. Alloys Compd. 619, 697 (2015).Google Scholar
Abdel Halim, K.S., Bram, M., Buchkremer, H.P., and Bahgat, M.: Synthesis of heavy tungsten alloy by thermal technique. Ind. Eng. Chem. Res. 51(50), 16354 (2012).CrossRefGoogle Scholar
Rabin, B.H. and German, R.M.: Microstructure effects on tensile properties of tungsten–nickel–iron. Metall. Trans. A 19, 1523 (1988).Google Scholar
Shu-dong, L., Jian-hong, Y., Ying-Li, G., Yuan-dong, P., Li-ya, L., and Jun-ming, R.: Microwave sintering W–Cu composites: Analyses of densification and microstructural homogenization. J. Alloys Compd. 473(1–2), 5 (2009).CrossRefGoogle Scholar
Ryu, H.J., Hong, S.H., and Reak, W.H.: Mechanical alloying process of 93W-5.6Ni-1.4Fe tungsten heavy alloy. J. Mater. Process. Technol. 63(1–3), 292 (1997).Google Scholar
Fan, J.L., Liu, T., Cheng, H., and Wang, D.: Preparation of fine grain tungsten heavy alloy with high properties by mechanical alloying and yttrium oxide addition. J. Mater. Process. Technol. 208, 463 (2008).Google Scholar
Matejicek, J., Koza, Y., and Weinzettl, V.: Plasma sprayed tungsten-based coatings and their performance under fusion relevant conditions. J. Mater. Process. Technol. 395, 75 (2005).Google Scholar
Bagchi, T.P., Arvind Kumar, N., Sarma, B., and Maitra, N.: Mater. Chem. Phys. 67(111), 9 (2001).Google Scholar
Upadhyaya, A., Tiwari, S.K., and Mishra, P.: Microwave sintering of W–Ni–Fe alloy. Scr. Mater. 56, 5 (2007).CrossRefGoogle Scholar
Mikolaj, D., Henrikas, C., and Zbigniew, S.: Electrodeposition and properties of Ni–W, Fe–W and Fe–Ni–W amorphous alloys. Electrochim. Acta 45, 3389 (2000).Google Scholar
Abdel Halim, K.S., Bahgat, M., and Fouad, O.A.: Thermal synthesis of nanocrystalline fcc Fe–Ni alloy by gaseous reduction of coprecipitated NiFe2O4 from secondary resources. Mater. Sci. Technol. 22, 1396 (2006).CrossRefGoogle Scholar
Abdel Halim, K.S., Khedr, M.H., and Zaki, A.H.: Kinetics and mechanisms of the reduction of Cu0.5Zn0.5Fe2O4 with hydrogen at 400–600 °C for the production of metallic nanoparticles. J. Anal. Appl. Pyrolysis 80, 346 (2007).Google Scholar
Bahgat, M., Paek, M.K., and Pak, J.J.: Hydrogen reduction of Fe2O3/WO3 mixture with synthesis of nanocrystalline Fe/W composite. Mater. Trans. 49(6), 1480 (2008).Google Scholar
Khedr, M.H., Farghali, A.A., and AbdelKhalik, A.A.: Microstructure, kinetics and mechanisms of nano-crystalline CuFe2O4 reduction in flowing hydrogen at 300–600 °C for the production of metallic nano-wires. J. Anal. Appl. Pyrolysis 1, 78 (2007).Google Scholar
Bahgat, M., Paek, M.K., and Pak, J.J.: Reduction investigation of WO3/NiO/Fe2O3 and synthesis of nanocrystalline ternary W–Ni–Fe alloy. J. Alloys Compd. 472, 314 (2009).Google Scholar
Pineau, A., Kanari, N., and Gaballah, I.: Kinetics of reduction of iron oxides by H2: Part II. Low temperature reduction of magnetite. Thermochim. Acta 75, 456 (2007).Google Scholar
Abdel Halim, K.S.: Isothermal reduction behavior of Fe2O3/MnO composite materials with solid carbon. Mater. Sci. Eng., A 15, 452 (2007).Google Scholar
Nasr, M.I., Omar, A.A., Khedr, M.H., and El-Geassy, A.A.: Analysis of solid state reduction of iron ore from a couple of experimental measurements. Scand. J. Metall. 23, 119 (1995).Google Scholar
Bryk, C. and Lu, W.K.: Reduction phenomena in composites of iron ore concentrates and coals. Ironmaking Steelmaking 13, 70 (1986).Google Scholar
Abdel Halim, K.S., Khedr, M.H., Nasr, M.I., and Abdel Wahab, M.S.: Carbothermic reduction kinetics of nanocrystallite Fe2O3/NiO composites for the production of Fe/Ni alloy. J. Alloys Compd. 463, 585 (2008).Google Scholar
Zhu, J., Cao, S., and Liu, H.: Fabrication of W–Ni–Fe alloys with gradient structures. Int. J. Refract. Met. Hard Mater. 36, 72 (2013).CrossRefGoogle Scholar
Gong, X., Fan, J.L., Ding, F., Song, M., and Huang, B.Y.: Effect of tungsten content on microstructure and quasi-static tensile fracture characteristics of rapidly hot-extruded W–Ni–Fe alloys. Int. J. Refract. Met. Hard Mater. 30, 71 (2012).CrossRefGoogle Scholar
Yu, Y., Zhang, W., Yu, C., and Wang, E.: Effect of swaging on microstructure and mechanical properties of liquid-phase sintered 93W–4.9(Ni, Co)–2.1Fe alloy. Int. J. Refract. Met. Hard Mater. 44, 103 (2014).CrossRefGoogle Scholar
Bahgat, M., Abdel Halim, K.S., El-Kelesh, H.A., and Nasr, M.I.: Metallic iron whisker formation and growth during iron oxide reduction: K2O effect. Ironmaking Steelmaking 36(5), 379 (2009).Google Scholar
Abdel Halim, K.S., Bahgat, M., El-Kelesh, H.A., and Nasr, M.I.: Metallic iron whisker formation and growth during iron oxide reduction: Basicity effect. Ironmaking Steelmaking 36(8), 631 (2009).Google Scholar
Strangway, P.K.: MSc Thesis. Mater. Sci., University of Tronto, Canada, 1964.Google Scholar
Jang, J.S.C., Fwu, J.C., Chang, L.J., Chen, G.J., and Hsu, C.T.: Study on the solid-phase sintering of the nano-structured heavy tungsten alloy powder. J. Alloys Compd. 434–435, 367 (2007).CrossRefGoogle Scholar
Li, H.Q. and Ebrahimi, F.: An investigation of thermal stability and microhardness of electrodeposited nanocrystalline nickel–21% iron alloys. Acta Mater. 51, 3905 (2003).Google Scholar